Krystolâ„¢ Internal Membraneâ„¢- KIMâ„¢(K-301)

Waterproofing admixture for concrete.

KIM is the world's only permanent, self-sealing, corrosion-free, concrete waterproofer. KIM is a chemical admixture used for the treatment of concrete and concrete products to protect against water intrusion, leakage, cracking, chemical attack, and corrosion of reinforcing steel. KIM is a more reliable and cost-effective alternative to traditional waterproofing membranes because KIM turns the concrete itself into the membrane.

MSDS  •  DATASHEET

Krystolâ„¢ Broadcast (K-250)

Dry Broadcast Treatment for Concrete Flatwork.

Krystolâ„¢ Broadcast is a crystalline waterproofing treatment for concrete flatwork. Krystolâ„¢ Broadcast is applied dry to the fresh concrete surface and troweled into the concrete during the final finishing. The special Krystolâ„¢ chemicals penetrate deeply into the concrete mass protecting it against the passage of water.

MSDS  •  DATASHEET

Krystolâ„¢ T1 & T2 (K-210 & K-220)

Surface-Applied Slurry Treatment.

KRYSTOL T1 & T2 Waterproofing System is a cementitious, brush-applied, treatment for concrete. KRYSTOL T1 & T2 contain the proven world-renowned Krystolâ„¢ waterproofing chemicals. Krystolâ„¢ T1 is applied to the concrete first followed by KRYSTOL T2. When applied in accordance with manufacturer's specifications, the Krystolâ„¢ system is warranted for use in place of conventional waterproofing systems. KRYSTOL T1 & T2 react chemically within the concrete mass to form billions of needle-like crystals which block the pores, voids and microcracks in concrete. Presaturation and subsequent re-wetting of the surface will cause deeper diffusion of the organic chemicals and formation of crystals at greater depth.

MSDS  •  DATASHEET

Krystolâ„¢ Plug (K-620)

Rapid-Setting Hydraulink Cement.

KRYSTOL PLUG is a powder that, when mixed to a stiff-dough consistency with water, may be used to immediately arrest the seepage or flow of water through concrete cracks. Within two minutes, Krystolâ„¢ Plug sets to a completely waterproof seal and continues to harden until its strength exceeds that of the concrete onto which it has been applied.

MSDS  •  DATASHEET

Krystolâ„¢ Baricote (K-315)

Water Barrier for Concrete or Brick.

Krystolâ„¢ Baricote is a fast-setting waterproof grout that is specially designed to repair leaking cracks, holes and joints in concrete as outlined in Technical Bulletins 101 & 102. Krystolâ„¢ Baricote contains special ingredients that react chemically with concrete to form millions of needle shaped hydration crystals. These crystals grow deep into the capillary pores of the grout and surrounding concrete to block the passage of water.

MSDS  •  DATASHEET

Krystolâ„¢ Plasti-Patch (K-511)

High-Performance Concrete Patch.

Plasti-Patch is a high-performance, single component, self-bonding concrete patching and repair mortar. It is designed for concrete and masonry.

MSDS  •  DATASHEET

Krystolâ„¢ Waterstop Grout (K-322)

Ultra Strong, Reactive Waterproofing Grout.

Krystolâ„¢ Waterstop Grout is a specially formulated powder containing the proven chemistry of Krystolâ„¢ integral crystalline waterproofing. Krystolâ„¢ Waterstop Grout is a primary component of the Krystolâ„¢ Waterstop System and is used to create concrete construction joints that are permanently waterproof. The active ingredients in Krystolâ„¢ Waterstop Grout combine chemically with water and concrete to form millions of needle-shaped crystals that grow in all directions to fill any capillary pores, cracks and joints that might otherwise allow water to pass.

MSDS  •  DATASHEET

Krystolâ„¢ Waterstop Treatment (K-321)

Cementitious Waterproofing Slurry Treatment.

Krystolâ„¢ Waterstop Treatment is a specially formulated powder containing the proven chemistry of Krystolâ„¢ integral crystalline waterproofing. Krystolâ„¢ Waterstop Treatment is a primary component of the Krystolâ„¢ Waterstop System and is used to create concrete construction joints that are permanently waterproof. The active ingredients in Krystolâ„¢ Waterstop Treatment combine chemically with water and concrete to form millions of needle-shaped crystals that grow in all directions to fill any capillary pores, cracks and joints that might otherwise allow water to pass.

MSDS  •  DATASHEET

News

Stockland Shellharbour Shopping Centre.

Krystol Group have been awarded the concrete waterproofing requirements for Stockland Shellharbour project, estimated 10,000m3 of Krystol Internal Membrane (KIM) to be utilised.
Read more.

Acceptance!

Krystol Group gains acceptance and approval from three major consulting engineering firms.
Read more.

Energy Australia Contract

Energy Australia Ð Training Centre Silverwater project on the way.
Read more.

Sydney Desalination Plant

Krystol Group completes waterproofing requirements for Sydney Desalination Plant.
Read more.

Krystol Wins 700m Pour!

Krystol Group won the contract for the supply and installation of KIM waterproofing admixture to the Kambala High School Project.
Read more.