KGM-100 is a single component moisture curing polyurethane membrane, which is coated over surfaces to form a seamless watertight finish. When particular membrane molecules come in contact with moisture, KGM-100 cures to produce a solid but highly flexible material that will provide you with dependable waterproofing protection.
KGM-100 has a wide range of uses and is designed to waterproof most non-exposed external wet areas for above and below ground construction. Typical areas of application include retaining walls, planter boxes, balconies, non-exposed roof decks, elevator pits and equipment pits, detention tanks as well as tunnels and underground vaults.
Polyurethane aliphatic top coat
KGM-125 is a single component, aliphatic polyurethane waterproofing top coat which has been formulated as a complementary and compatible top coat for KGM-100. KGM-125 forms a tough, flexible, seamless, waterproof coating. Aliphatic technology provides greater UV protection, colour fastness and anti-chalking properties to extend the life of exposed polyurethane.
KGM-125 is primarily formulated as a highly UV stable top coat over KGM-100 for specific exposed areas to give greater long term protection. This includes exposed concrete roof decks, brick and blockwork.
Water-Based Polyurethane Membrane
KGM-200 is a water-based polyurethane Class III waterproofing membrane. It cures to form a durable, odourless, impervious seamless membrane that resists re-emulsifying after it has fully dried.
It is designed for both internal and non-exposed external applications. Typical areas of application include bathrooms and wet areas, planter boxes, balconies, tiled or topped decks and water tanks.
UV Stable Acrylic Membrane
KGM-300 is a single component, water-based, UV stable, acrylic emulsion waterproofing Class II membrane. It is an elastomeric, environmentally friendly membane which cures to form a durable, UV resistant, odourless, impervious, seamless membrane that resists re-emulsifying after it has fully dried even if immersed in water.
KGM-300 has been formulated for applications requiring long term waterproofing for both exposed and non-exposed external applications. This includes exposed areas of concrete, timber decks & roofs; as well as immersed and underground applications like ponds and planter boxes.
General Purpose Water-Based Primer
KGM-400 is a single component, general purpose primer used to enhance the bond of water-based coatings. It is a penetrative primer with good adhesion properties.
KGM-400 can be used to prime porous substrates over which a water-based membrane or coating will be applied. This includes internal wet areas, dry surfaces, concrete and masonry substrates and cement-based sheeting.
General Purpose Solvent-Based Primer
KGM-425 is a single component, solvent-based primer formulated to prime most surfaces prior to using KGM-100. It is a penetrative primer with strong adhesion properties and enhances the performance and functionality of the waterproofing membrane.
KGM-425 can be used to prime porous substrates over which a membrane or coating will be applied. This includes substrates such as concrete, cement and cement render, timber, plaster board and fibre-cement sheeting as well as brick and block work.
Water-Based Epoxy Primer & Sealer
KGM-500 is a high performance, two-part epoxy primer and sealer used in conjunction with solvent or water-based coatings. It can also be used on damp surfaces to speed up construction time.
It is used to prime and seal porous and semi-porous substrates such as newly laid concrete over which a membrane, paint or coating is to be applied. This includes basements, retaining walls, tanks, timber and concrete floors
Solvent-Free Specialty Primer
KGM-525 is a solvent-free primer with excellent adhesion properties for use on metallic, smooth, dense and non-porous surfaces. KGM-525 enables the adhesion of a wide range of paints, coatings, membranes and adhesives over non-absorbent surfaces. It is used to prime over galvanised iron, zincalume, stainless steel, copper, brass and most metals as well as tiles and plastics.
Flexible Polymer Cementitious Membrane
KGM-700 is a high performance, single component flexible polymer cementitious membrane which only requires water to be added to the powder to form a high quality liquid membrane. Based on cross-polymer technology with outstanding adhesion properties, KGM-700 cures to provide you with dependable waterproofing protection for a wide range of positive and negative applications including lift pits, podiums, terraces, external balconies and decks, planter boxes and garden beds, and water features. It is designed for concrete, masonry and mineral substrates.
Non-Solvent Bitumen Rubber Membrane
KGM-800 is a flexible, solvent-free, polymer-modified bitumen rubber membrane. It is designed for a wide range of waterproofing applications over multiple building substrates. KGM-800 is water-based and has excellent sealing and adhesion properties. It has the ability to handle permanently wet conditions once cured and is odourless and easy to use. KGM-800 can be applied to retaining walls, undergound waterproofing, sealing failed or aged bitumen surfaces. It is also used as a protective coating for metal surfaces and wood.