Krystol Internal Membrane™ (KIM®) (K-301)
Waterproofing admixture for concrete.
KIM is the world's only permanent, self-sealing, corrosion-free, concrete waterproofer. KIM is a chemical admixture used for the treatment of concrete and concrete products to protect against water intrusion, leakage, cracking, chemical attack, and corrosion of reinforcing steel. KIM is a more reliable and cost-effective alternative to traditional waterproofing membranes because KIM turns the concrete itself into the membrane.
Krystol Broadcast™ (K-250)
Dry Broadcast Treatment for Concrete Flatwork
Krystol Broadcast™ is a crystalline waterproofing treatment for concrete flatwork. Krystol Broadcast™ is applied dry to the fresh concrete surface and troweled into the concrete during the final finishing. The special Krystol® chemicals penetrate deeply into the concrete mass protecting it against the passage of water.
Krystol T1® (K-210)
Surface-Applied Slurry Treatment
Krystol T1 is a surface-applied crystalline slurry treatment that transforms new of existing concrete into a permanent waterproof barrier. Krystol T1 contain Krystol® waterproofing chemicals. Krystol T1 lowers the permeability of the concrete to protect against the ingress of water and waterborne chemicals. Since it becomes integral to the concrete, it can be applied to either the positive (wet) or negative (dry) side of the water pressure which allows reliable hydrostatic waterproofing protection and remediation for even the most difficult applications.
Krystol Plug™ (K-620)
Rapid-Setting Hydraulic Cement
Krystol Plug™ is a powder that, when mixed to a stiff-dough consistency with water, may be used to immediately arrest the seepage or flow of water through concrete cracks. Within two minutes, Krystol Plug™ sets to a completely waterproof seal and continues to harden until its strength exceeds that of the concrete onto which it has been applied.
Krytonite™ Swelling Waterstop (K-325Y5)
Waterproofing for Construction Joints
Krytonite Swelling Waterstop is specially designed for sealing construction joints in concrete construction. Krytonite is a non-bentonite flexible hydrophilic swelling waterstop that is fully compatible with Kryton’s Krystol Internal Membrane (KIM) Admixture System. When Krystol admixture technology is used with Krytonite, it provides a crystalline barrier before the water can come into contact with the outboard facing rebar.
Krystol Repair Grout™ (K-510)
Krystol Repair Grout is a crystalline concrete waterproofing product that stops the flow of water to permanently repair leaking cracks, holes and joints in concrete, and can also be used to resurface and waterproof defective, damaged or deteriorating concrete. Repair Grout can be used for large repairs up to a maximum size of 100mm. Krystol Repair Grout contains Krystol technology. When applied to concrete, Krystol chemically reacts with water and un-hydrated cement particles to form insoluble needle-shaped crystals that fill capillary pores and micro-cracks in the concrete and block the pathways for water and waterborne contaminants. Any moisture introduced over the lifespan of the concrete will initiate crystallization, ensuring permanent waterproofing protection.
Krystol Mortar Admixture™ (KMA) (K-309)
Protection Admixture for Renders/Plasters, Masonry Mortars, and Concrete Masonry Units
Krystol Mortar Admixture (KMA) is a hydrophilic crystalline admixture used to provide long-term protection of masonry mortars and concrete mortar units against water and waterborne contaminants by reducing permeability and absorption of the mortar. KMA contains Krystol technology. When added to cementitious mortars or concrete masonry units, Krystol chemically reacts with water and unhydrated cement particles to form insoluble needle-shaped crystals that fill capillary pores and micro-cracks in the concrete and block the pathways for water and waterborne contaminants. Any moisture introduced over the lifespan of the concrete will initiate crystallisation, ensuring permament waterproofing protection.
Krystol Waterstop Treatment™ (K-321)
Krystol Waterstop Treatment is a cementitious slurry applied to horizontal and vertical construction joints that assists in waterproofing the structure and provides a protection of rebar in the jointing from corrosion. Specially formulated with Kryton's proven Krystol technology, the active ingredients combine chemically with water and un-hydrated cement to forms millions of needle-shaped crystals that grown in all directions to fill any capillary pores, cracks and joints. It is used in conjunction with Krytonite Swelling Waterstop, at at all static concrete-to-concrete joints where water penetration is a concern, and can also be used by itself as a damp proofing treatment.
Integral Hardening Admixture
Hard-Cem is an integral hardening admixture used to increase abrasion and erosion resistance of concrete. It is added to the concrete at the time of batching to increase the hardness of the concrete and expand concrete wear life. Since it is integral, Hard-Cem can be used to harden horizontal, vertical or inclined concrete and shotcrete surfaces. It can be used to enhance both air-entrained and non-air-entrained concretes.