| Krystol™ Internal Membrane - KIM (K-300,301) |
| |
KIM is the world's only permanent, self-sealing, corrosion-free, concrete waterproofer. KIM is a chemical admixture used for the treatment of concrete and concrete products to protect against water intrusion, leakage, cracking, chemical attack, and corrosion of reinforcing steel. KIM is a more reliable and cost-effective alternative to traditional waterproofing membranes because KIM turns the concrete itself into the membrane.
Back to Top
|
| |
| |
| Krystol™ Mortar Admixture - KMA (K-309) |
| |
Krystol™ Mortar Admixture (KMA) is a specially designed chemical admixture for wterproofing cementitious mortar. KMA contains a unique blend of specialty chemicals that react with the cementitious materials in the mortar to form hydration crystals. These long, hair-like crystals block the capillary pores and micro-cracks within the mortar so that permeability of the mortar is dramatically reduced.
Back to Top
|
| |
| |
| Krystol™ Broadcast (K-250) |
| |
Krystol™ Broadcast is a crystalline waterproofing treatment for concrete flatwork. Krystol™ Broadcast is applied dry to the fresh concrete surface and troweled into the concrete during the final finishing. The special Krystol™ chemicals penetrate deeply into the concrete mass protecting it against the passage of water.
Back to Top
|
| |
| |
| Krystol™ T1 & T2 (K-210 & K-220) |
| |
KRYSTOL T1 & T2 Waterproofing System is a cementitious,
brush-applied, treatment for concrete. KRYSTOL T1 & T2 contain the
proven world-renowned Krystol™ waterproofing chemicals. Krystol™ T1 is
applied to the concrete first followed by KRYSTOL T2. When applied in
accordance with manufacturer's specifications, the Krystol™ system is
warranted for use in place of conventional waterproofing systems. KRYSTOL T1 & T2 react chemically within the concrete mass to form billions of needle-like crystals which block the pores, voids and microcracks in concrete. Presaturation and subsequent re-wetting of the surface will cause deeper diffusion of the organic chemicals and formation of crystals at greater depth.
Back to Top
|
| |
| |
| Krystol™ Plug (K-620) |
| |
KRYSTOL PLUG is a powder that, when mixed to a stiff-dough consistency with water, may be used to immediately arrest the seepage or flow of water through concrete cracks. Within two minutes, Krystol™ Plug sets to a completely waterproof seal and continues to harden until its strength exceeds that of the concrete onto which it has been applied.
Back to Top
|
| |
| |
| Krystol™ Baricote (K-315) |
| |
Krystol™ Baricote is a fast-setting waterproof grout that is specially designed to repair leaking cracks, holes and joints in concrete as outlined in Technical Bulletins 101 & 102. Krystol™ Baricote contains special ingredients that react chemically with concrete to form millions of needle shaped hydration crystals. These crystals grow deep into the capillary pores of the grout and surrounding concrete to block the passage of water.
Back to Top
|
| |
| |
| Krystol™ Plasti-Patch (K-511) |
| |
Plasti-Patch\u2122 is a single component, self-bonding, high-strength concrete patching and repair mortar for concrete and masonry.
Back to Top
|
| |
| |
| Krystol™ Waterstop Grout (K-322) |
| |
Krystol™\u2122 Waterstop Grout is a specially formulated powder containing the proven chemistry of Krystol™ integral crystalline waterproofing. Krystol™ Waterstop Grout is a primary component of the Krystol™ Waterstop System and is used to create concrete construction joints that are permanently waterproof. The active ingredients in Krystol™ Waterstop Grout combine chemically with water and concrete to form millions of needle-shaped crystals that grow in all directions to fill any capillary pores, cracks and joints that might otherwise allow water to pass.
Back to Top
|
| |
| |
| Krystol™ Waterstop Treatment (K-321) |
| |
Krystol™\u2122 Waterstop Treatment is a specially formulated powder containing the proven chemistry of Krystol™ integral crystalline waterproofing. Krystol™ Waterstop Treatment is a primary component of the Krystol™ Waterstop System and is used to create concrete construction joints that are permanently waterproof. The active ingredients in Krystol™ Waterstop Treatment combine chemically with water and concrete to form millions of needle-shaped crystals that grow in all directions to fill any capillary pores, cracks and joints that might otherwise allow water to pass.
Back to Top
|
| |
| |
| Hydrostop MS (K-770) |
| |
HYDROSTOPTM is a state of the art water-repellent sealer specifically designed for concrete, brick and masonry. HYDROSTOPTM works better and lasts much longer than conventional sealers because it contains a unique blend of silane and siloxane compounds which chemically react with silicates below the surface of the substrate. This reaction forms an insoluble, water-repellent barrier within the surface that cannot wear away, fade, yellow, crack or peel. The finished application is virtually invisible, leaving the surface with its original appearance and breathability.
Back to Top
|
| |
| |
| Hydrostop WB (K-773) - Water Based |
| |
HYDROSTOPTM WB is a water-based state of the art water-repellent sealer specifically designed for concrete, brick and masonry. HYDROSTOPTM WB works better and lasts much longer than conventional sealers because it contains a unique blend of silane and siloxane compounds which chemically react with silicates below the surface of the substrate. This reaction forms an insoluble, water-repellent barrier within the surface that cannot wear away, fade, yellow, crack or peel. The finished application is virtually invisible, leaving the surface with its original appearance and breathability.
Back to Top
|
| |
| |
| |
Krystol™ supply and install the Krystol™ range of products under an exclusive distributor agreement, Krystol™ also supply and install the following products:
- Superswell 47B slow delay waterstop
- Reargaurd and Centre bulb systems
- Expansion Joints systems
- Concrete curing products
- Concrete sealing Products
- Fuko and other injections systems
Please contact our enqs@krystol.com.au to make any enquiries or please call the office on (02) 9545 - 3111 regarding these or other systems which maybe needed for your particular project.
|
| |
